Furnace & heating
AC repair
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterFurnace Repair in Houston, TX
Furnace repair in Houston typically runs between $150 and $600, depending on what’s failed inside the unit, and most common fixes like ignitor replacement or flame sensor cleaning can be completed in a single visit. At Meadowsweet Heating and Air Houston, we service Carrier, Trane, Lennox, and Goodman furnaces across the Houston metro, and every repair starts with a written price before any work begins. If your furnace is blowing cold air, short cycling, or making sounds it shouldn’t, call us at (346) 201-5395 and a live person will answer, day or night.
Houston’s furnace season is short but intense. When a cold front pushes through in January and the temperature drops into the 30s, a furnace that worked fine in November suddenly gets asked to run for 18 hours straight. That’s when weak parts fail. Our home comfort team has spent years repairing furnaces across the Houston area, and we know exactly what Houston humidity, dust, and irregular usage patterns do to heating equipment. This page is part of our full Heating & Furnace in Houston guide, where you’ll find more detail on maintenance, installation, and system options.
Key Takeaways
- Most Houston furnace repairs cost between $150 and $600, with a written quote provided before work starts.
- Common furnace failures here include ignitors, flame sensors, blower motors, and control boards.
- Every visit includes shoe covers, drop cloths, and a photo of the clean-up before we leave.
- The 365-Day Done Right Promise backs every repair we make, with no fine print.
- A live person answers our phone 24/7 at (346) 201-5395, including weekends and holidays.
When You Need Furnace Repair
Some furnace problems show up as a complete shutdown. Others are quieter: a slight burning smell, a room that never quite reaches the thermostat setting, a blower that runs but pushes lukewarm air. Here are the symptoms Houston homeowners call us about most often:
- Cold air blowing from the vents: In most cases, the burners are not igniting. This often points to a failed ignitor or a dirty flame sensor, both common in Houston because furnaces sit idle for months at a time and collect dust and humidity-related residue.
- Short cycling: The furnace starts, runs for a minute or two, then shuts off before the house is warm. This can be a clogged filter, a failing limit switch, or an overheating heat exchanger. In neighborhoods like Meyerland and Spring Branch, where many homes have older ductwork, airflow restrictions make short cycling more frequent.
- Loud banging, popping, or rattling: A delayed ignition can cause a small gas buildup that pops when it lights. A rattling noise often means a loose blower wheel or failing motor bearings. These sounds shouldn’t be ignored because they can point to parts that are working harder than they should.
- Yellow or flickering burner flame: A healthy gas furnace flame burns steady and blue. A yellow or flickering flame can indicate incomplete combustion, which might mean a dirty burner or a venting issue. This is one of the few furnace symptoms that warrants immediate attention, especially in tightly sealed newer homes in areas like Katy or Pearland.
- Furnace won’t turn on at all: Sometimes it’s a tripped breaker or a failed thermostat. Sometimes the control board has given out. We check the simplest possibilities first and the most expensive possibilities last, so you’re not paying for parts you don’t need.
- Unexplained spike in gas bills: If your December gas bill jumped and the house doesn’t feel warmer, the furnace may be running inefficiently. A dirty burner, failing inducer motor, or cracked heat exchanger can all waste gas. Houston families in older homes along Washington Avenue and the Heights see this more often because systems there are frequently 15 to 20 years old.
Our Furnace Repair Process
We’ve refined our repair process over two decades inside the Cedarwell family of HVAC companies, which was founded in 2004. The goal is simple: diagnose accurately, explain clearly, fix properly, and leave the house cleaner than we found it.
- You call and a live person answers. No voicemail queue, no call center script. You tell us what the furnace is doing, and we schedule a visit at a time that works for your family. Same-day appointments are often available for no-heat calls in Houston.
- Diagnosis with a written price before work. Our technician arrives in uniform, puts on shoe covers, and lays down drop cloths before touching anything. After the diagnosis, you get a written price for the repair. You approve it before any part is ordered or any tool comes out.
- The repair, done with the household in mind. We work quietly when possible, keep tools and parts contained to the work area, and let you know if anything needs to be moved. If you have dogs or small children at home, we’ll tell you what we’re doing and keep the workspace safe and contained.
- Testing and verification. We don’t leave after swapping a part. We run the furnace through full heating cycles, check the temperature rise, verify the burners ignite cleanly, and confirm the thermostat is communicating properly.
- Clean-up with a photo before we go. Drop cloths come up, tools go back in the truck, and we take a photo of the work area so you can see exactly what we’re leaving behind. This step is included on every job, not offered as an add-on.
Furnace Repair Pricing in Houston
Honest pricing starts with knowing what’s actually wrong. Here’s what Houston families can expect to pay for common furnace repairs, based on what we see across the city:
| Repair Type | Typical Cost Range in Houston |
|---|---|
| Flame sensor cleaning or replacement | $75 – $185 |
| Ignitor replacement | $150 – $325 |
| Blower motor replacement | $350 – $750 |
| Control board replacement | $250 – $600 |
| Inducer motor replacement | $400 – $850 |
| Thermostat replacement | $150 – $400 |
| Gas valve replacement | $250 – $550 |
What changes the final number? The brand and age of the furnace matters. A Carrier or Trane furnace from the last eight years often uses proprietary or higher-cost OEM parts, while an older Goodman or Lennox unit might take a universal component. The location of the furnace also plays a role: Houston homes with attic units, common in newer construction in Cypress and Sugar Land, often require more labor time than a closet unit in a ranch house in Oak Forest. Emergency calls on cold nights, especially when Houston sees a hard freeze, may carry an after-hours rate, but you’ll always see that cost in writing before we start.
We offer free estimates on furnace repair. When you call (346) 201-5395, we’ll ask about the symptoms over the phone and give you a clear idea of what to expect before the technician even arrives.
Why Houston Families Choose Meadowsweet for Furnace Repair
The market for HVAC repair in Houston is crowded. What separates us isn’t a clever slogan. It’s the Cedarwell Care Promise, a set of standards that has defined how we work since 2004:
- 365-Day Done Right Promise: If a repair isn’t done right, we make it right. No runarounds, no fine print, no charge for the follow-up. That promise applies to every furnace repair we make, on every brand we service.
- The C.A.R.E. values code: Our technicians follow a specific behavioral standard on every visit: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, Explain the price before the work. That’s not a personality trait, it’s a system.
- Written price before any work starts: On every visit, every time. If the repair is more involved than expected, you’ll know before we proceed.
- Nine equipment brands covered: We repair Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard furnaces. Most Houston homes have one of these brands in the attic or closet.
- Live answer, 24 hours a day: When it’s 38 degrees outside and your furnace quits at 2 a.m. in Kingwood, you call and a person picks up. That’s been true since the day the Cedarwell family of companies began serving Houston.
FAQs – Furnace Repair
How much does furnace repair cost in Houston?
Furnace repair in Houston typically costs between $150 and $600, with most homeowners paying around $300 for common issues like flame sensor cleaning or ignitor replacement. Larger repairs like blower motors or inducer motors run higher, and the final number depends on your furnace brand, age, and location within the home. Call (346) 201-5395 for a free phone estimate based on your specific symptoms.
Can you come today if my furnace stops working?
Yes, we offer same-day furnace repair appointments for Houston homeowners whenever scheduling allows, and we prioritize no-heat calls during cold weather. A live person answers the phone 24/7, so if your furnace quits tonight, call (346) 201-5395 and we’ll get someone out as quickly as possible.
Is it cheaper to repair or replace a furnace in Houston?
If the repair costs less than 30% of a new furnace and your system is under 12 years old, repair usually makes financial sense. Houston’s mild winters mean furnaces see less annual wear than in northern climates, so a well-maintained unit here can last 15 to 20 years. When a heat exchanger fails or the repair approaches half the cost of replacement, we’ll tell you honestly and help you compare options before you spend a dollar.
Do you service all furnace brands?
We service nine leading equipment brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. If your furnace is one of these brands, we have the training and the parts access to repair it properly the first time. If you’re not sure what brand is sitting in your attic, call (346) 201-5395 and we’ll help you identify it over the phone.
Do your technicians wear shoe covers and protect my floors?
Yes, shoe covers and drop cloths are standard on every visit, not an optional add-on. Before our technician enters your home, the shoe covers go on. Before any work begins, drop cloths go down around the work area. Before we leave, we take a photo of the clean-up and show it to you. If you have pets or kids, we’ll also let you know what areas to keep clear while the repair is in progress.
Call Meadowsweet Heating and Air Houston
When your furnace quits on the coldest night of the year, you don’t need a sales pitch. You need a repair crew that shows up, tells you the truth, protects your floors, and fixes the problem. That’s what Meadowsweet Heating and Air Houston does, and it’s what the Cedarwell Care Promise has meant to Houston families for over two decades.
Call (346) 201-5395 for a free estimate. A live person answers, day or night. We’ll schedule the visit, give you a written price before any work starts, and leave your home the way we found it: clean, warm, and quiet.
Written by Luis Serrano, Owner at Meadowsweet Heating and Air Houston, serving Houston.