A Meadowsweet company - serving Houston, TX

Lennox Heat Pump Service Nationwide

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Lennox Heat Pump Service: The Houston Owner’s Guide

Lennox heat pump service in Houston typically runs between $150 and $650 for repairs, with most homeowners paying on the lower half of that range when a single component like a capacitor, contactor, or defrost sensor has failed. We stock the most common Lennox-compatible parts on our trucks, so we can often complete the repair in one visit, same day in many Houston neighborhoods. The phone call usually starts the same way: “The outside unit is running but the air inside isn’t cold,” or “There’s ice on the coil in July, which feels wrong.” Both are classic Lennox heat pump symptoms, and both have answers we can get to quickly once we know what the house is doing.

Call (346) 201-5395

Key Takeaways

  • Most Lennox heat pump repairs land between $150 and $650, with a written price before any work starts.
  • We stock common Lennox-compatible parts on the truck: capacitors, contactors, defrost boards, thermistors, and fan motors.
  • Meadowsweet Heating and Air Houston is an independent service provider, not affiliated with Lennox, but we service Lennox equipment across nine brands.
  • Same-day service is real for most repairs. A live person answers at (346) 201-5395, 24/7.

Which Lennox Models This Applies To

We service the Lennox heat pump lines we see most across the greater Houston area: the Merit series (ML14XP1, ML17XP1), the Elite series (XP14, XP16, XP20, XP21), and the Dave Lennox Signature Collection (XP25, XP20 variable-capacity units). The compatibility gotcha for Lennox parts is the model number’s minor revision letter. A defrost sensor from an XP14-030-230A01 does not always interchange with the -B02 revision, and a capacitor spec can change between production years even when the model number looks identical. We always pull the exact model and serial from the unit’s data plate before ordering or installing, because guessing with Lennox parts means callbacks, and callbacks are not something we’re willing to hand a family.

Lennox OEM parts carry the brand’s engineering and warranty, but they come at a premium. For many components, a quality aftermarket equivalent from a supplier like Copeland, Emerson, or GE meets or exceeds the original spec at a lower installed price. Luis Serrano keeps a running list of every Lennox model he’s seen across Houston, including filter sizes, so when a repeat customer calls from Katy or the Heights, he already knows what the house has before the truck rolls. That kind of memory is not a sales tactic. It’s just basic respect for someone’s home.

Explore

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane
Goodman
Goodman

Signs Your Lennox Heat Pump Service Is Failing

Here are the symptoms we hear most from Houston homeowners with Lennox heat pumps, and what each one usually means:

  • Outside unit runs, inside air is lukewarm. This is often a failed run capacitor or a compressor that’s short-cycling on thermal overload. The capacitor gives the compressor its starting jolt, and Houston’s summer heat pushes capacitors past their rated hours faster than most people expect.
  • Ice building up on the outdoor coil in summer. That’s a defrost board, sensor, or reversing valve issue. Lennox defrost thermistors are small and easy to misdiagnose, but when the system incorrectly enters defrost mode in 98-degree weather, the coil freezes up fast.
  • Heat pump blows cold air in heat mode. This is the reversing valve failing to shift. On Lennox systems, a stuck reversing valve is often misread as a low-refrigerant call by technicians who don’t test the solenoid first. We test the board and solenoid before we touch the refrigerant side.
  • Unit short-cycles: turns on, shuts off, repeats. Usually a pressure switch or a failing thermostat connection. On variable-capacity Lennox models, an inverter board fault can produce the same rapid cycling, and that board is not a part you want to replace on a guess.
  • Humming sound, no start. That’s the classic failed capacitor. The compressor hums because it can’t get the torque to spin up. If you hear it, kill the power at the disconnect and call us. Running a compressor in locked-rotor state cooks the windings in minutes.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Lennox heat pump repairs in Houston, here’s what families can expect at the call, before and during the work:

  • Diagnostic visit: $80 to $200, credited toward the repair if you approve the work. We give you a written price before the repair starts, every time.
  • Common component replacements: $150 to $400 installed for capacitors, contactors, defrost sensors, and thermistors. Larger components like fan motors, defrost boards, and reversing valves typically run $350 to $650 installed, depending on the Lennox series.
  • Full system replacement (if the heat pump is beyond repair): $3,500 to $7,500 installed in Houston, matching our standard AC installation pricing across all brands.

Every repair includes parts, labor, a written price before work starts, and the 365-Day Done Right Promise. If it is not done right, Meadowsweet makes it right, no runarounds, no fine print. Our techs are background-checked and uniformed, and they follow the C.A.R.E. values on every visit: Clean up like it’s their own home, Ask before moving anything, Respect the family’s time and quiet hours, and Explain the price before the work.

DIY or Call Us?

For a Lennox heat pump, the honest line is this: you can safely check the thermostat settings, the air filter, and whether the breakers are tripped. Those three checks solve a surprising number of no-cooling calls, especially in Houston where high humidity and pet hair clog filters faster. But once you’re opening the outdoor cabinet, you’re dealing with 240 volts and capacitors that hold a charge even after the power is off. A capacitor can knock a person across a driveway. We don’t tell people to do that themselves, and we don’t sell parts for DIY electrical work either. High-tension electrical components on a heat pump are genuinely dangerous, and a trained professional should handle them. If you’ve checked the easy three and the system still isn’t right, call us at (346) 201-5395. We’ll bring the part, the meter, and the care to leave your home the way we found it.

FAQs

Need HVAC help in Houston? Licensed & insured · 30-60 min response · free estimates
Call (346) 201-5395
Local Service Coverage

Request a Free Estimate in Houston

Tell us what you need - Meadowsweet Heating and Air Houston responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and authorize us to contact you by call, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - 24/7 Dispatch